• KLOTZ 2.5mm² 2 Core Neutrik Speakon to 1/4" Higher Speaker Power Lead
Neutrik KLOTZ CABLES
High Quality Robust Connectors     High Quality German Hard Wearing Cable

Ultimate Pro Audio Ltd

Genuine Components Professionally Handmade to Order

Choose Your Length From The Drop Down Menu 0.5m to 30m

2.5mm² 2 Core Cable for better power transfer between amplifier and speaker

High quality Speakon to 1/4" 6.35mm Jack Plug lead. For higher power heavy duty application and less power waste across the cable. Made with genuine 2 pole Neutrik Speakons, Neutrik Rean NYS225L Jack Plug which was designed for speaker use and KLOTZ Twinaxial professional 2 core 2.5mm² (14AWG) speaker cable.

KLOTZ cable is made in Germany. KLOTZ cables have been delivering quality cables for decades and are trust and tried. We carefully selected this speaker cable as it gives great robustness, flexibility and has a quality feel that you only get from high end cables. The cable has a twisted pair of conductors within the outer jacket which really helps when coiling the cable up time and time again after gigs and touring and helps to stop kinking.

Connections are made on +1 -1 on each of the NL2FX Speakons on this lead.

This lead is designed to go between any passive speaker cabinet and a power amplifier. Connections are made on +1 -1 connections within the 2 pole NL2FX Neutrik Speakon connector.

Connections on the Jack plug tip connects to the +1 pole on the Speakon. Sleeve connects to the -1 on the Speakon. This a standard configuation that suit most applications where a passive loudspeaker is used. The cable is soldered to the solder contacts inside the Jack plug, we then heatshrink over the cable crimp grip part and the soldered connections of the connector and then screw the rear shell on. Many other cable makers do not do this!

All the components on this lead are genuine. Neutrik have improved and patented the design of the Speakon and have gone a long way to stop counterfeit Speakons being produced. Do not be fooled into buying inferior copied version that exist, they will break and let you down when you need them the most. Have confidence in the fact you are buying a connector that is 100% genuine and has all the Neutrik logos on the connector.

Typical applications for this lead are:

PA systems between power amplifier and passive speaker
Powered mixer to passive speaker
From an active speaker's Speakon output to passive extension speaker
Bass or Lead guitar amplifier head to speaker cab
Linking speaker cabs together

Note a passive speaker is a speaker cabinet without a built in amplifier and is driven solely by a power amplifier.

CABLE LENGTH - Know what you are getting and paying for.

This visible length from the rear of the connector. After searching the internet we have noted that many sellers of leads do not specify length precisely, this may not make a lot of difference when the lead is quite long but when the lead is very short it really does make a difference. The connectors use up approimately 100mm of cable inside of them. Some sellers do not specify the thickness of the cable either!

Neutrik make high quality connectors and have been doing this for decades. Where quality and reliability are needed they are trusted time and time again the biggest names in the professional audio industry.

Specification NL2FX

Current rating 40 A continuous, 50 A audio signal with 50% duty cycle
Only 3 parts, easy to assemble
High impact materials – long-lasting and reliable
Easy and extremely precise locking system "Quick Lock"
1 piece strain relief, chuck for 6 to 10 mm cable O.D.
Improved grip on latch
Mates with 4-pole chassis connector as well and makes contact with +1/-1

Neutrik Rean NYS225L 1/4" Jack Plug

The NYS225 Jack was designed to be used for speaker applications. We heat-shrink sleeve within the NYS225L Jack plug both on the + hot connection and also around the crimped cable grip

Rean is a make of Neutrik AG

Genuine KLOTZ Cable LY225 T Black

Made in Germany and has been around for decades. Tried and tested by hire companies, mobile touring bands, DJ's, and professionals around the world. The cable is one of best cables around and matches other branded cables. Designed specifically for connecting loudspeakers to power amplifiers.

Specifications KLOTZ Cable

2.5mm² (14AWG) made up of 50 x 0.25mm stands of OFC copper per core
Flexible - easy to coil
8mm diameter
Outer jacket soft black PVC - can withstand harsh life touring
Twisted pair easier for winding up
Working temperature -20 to +70 degrees celsius
Test Voltage 50Hz 1min 2000V
Max operating voltage 300V
7 ohms per KM

Made up by us

We bring Neutrik connectors and KLOTZ cable together in our workshop. We have many years of hands on experience making audio leads and have been successfully entrusted to do this by many customers over the years.

We sell many different leads please take a look in our eshop

Write a review

Please login or register to review

KLOTZ 2.5mm² 2 Core Neutrik Speakon to 1/4" Higher Speaker Power Lead

  • Product Code: K2.5NL2FXNYS225L
  • £12.79


Available Options


Tags: KLOTZ 2.5mm² 2 Core Neutrik Speakon to 1/4" Higher Speaker Power Lead