Neutrik Female XLR to 1/4" 6.35mm TRS Jack Lead. High quality lead made with high grade Van Damme balanced cable and the highly acclaimed Neutrik connectors.


This lead is also known as 'Female XLR to TRS Jack' or 'Female XLR to Stereo Jack' or 'Female XLR to 3 pole Jack' or 'Balanced Jack to Female XLR' all the terms are the same.

This a high quality professional custom made lead and will last for years.

Custom made for you

Available Colours Black Red Orange Yellow Green Blue Purple White

Standard Connections are made between the connectors on:

Pin 2 XLR - Tip Jack (Hot)

Pin 3 XLR - Ring Jack (Cold)

Pin 1 XLR - Sleeve Jack (Screen)

For mic/line level use only - this is NOT for connections between an amplifier speaker output to passive speaker

This lead is a balanced configuration and is intended for balanced audio equipment

Note if you use this lead on a piece of audio equipment that doesn't have a balanced input or output your audio may not sound correct as pin 3 will not be connected. Please ensure that both your input and output is balanced before buying this lead. Please consult your user manual for both of your input and output audio equipment if you are unsure.

Important - Lead length Reference Points

PLEASE MEASURE UP CAREFULLY TO AVOID ERRORS

Leads 1m or less (patch leads) will be measured visible cable from the rear black boot of the connector. We add 110mm of cable FREE to compensate for the connectors.

Leads over 1m will be measured cut length of cable. The connectors use up 110mm of cable.

If you need any specific length or need a little extra please ask - it can be made to that length as these are made to measure when we receive the order. Contact through ebay messages.

We can make the lead to an exact length if you want - Order the lead that is slightly longer and message us through ebay.

If you want a longer lead let us know.

Typical applications for this lead:

Mixer output XLR to amplifier inputs TRS

Link lead between power amplifiers

Balanced microphone to microphone balanced mic input Jack

Patching in racks between FX units, EQ media output devices.

Can be used for any mic/line level use

Mixer output to active speaker input (note an active speaker is a speaker with an amplifier built into it)

Please note that all inputs and output must be balanced

Van Damme Cable Specification:

A cable that is trustworthy reliable hard wearing. Van Damme Tour Grade Classic XKE Microphone cable combines flexibility, durability, noiseless operation and excellent handling characteristics. Van Damme cables can be found in many film and recording studios, professional touring applications, professional DJ setups, education sectors, hire companies. It really is a great cable. There aren't many cable companies that do have their own website but Van Damme is one of the exceptions. Their website has many a famous artist on there and many stories where Van Damme cable has been used in touring and hire applications. Please see http://www.van-damme.com click on tour.

Mechanical specification cable

Conductor Material Bare silver plated ultra pure oxygen free copper wire

Stranding 7 x 0.10mm

Material Bare ultra pure oxygen free copper wire

Stranding 21 x 0.10mm

Insulation Material XLPE Cross linked polyethylene

Diameter 1.60mm ±0.10

Colour coding Red, Blue

Cabling Type Twisted pair with cotton yarn fillers & paper wrap

Lay length 25mm

Screen Type 80 x 0.10mm close lap spiral bare oxygen free copper wire

Jacket Material Flexible PVC/Neoprene composite

Average thickness 1.40mm

Overall diameter 6.35mm ±0.15

Physical properties unaged

Jacket (at 60ºC) Tensile strength >8N/mm2

Elongation >250%

Heat shock test 120 ºC x 1 hour - no cracks

Test voltage 1000 Vdc x 1 minute OK

Electrical characteristics

Resistance Conductor Ohm/Km <85

Screen Ohm/Km <85

Insulation M Ohm/Km >5000

Capacitance Core to core pF/m 56 nominal

Neutrik Connectors:

Connectors used on this lead are Nickel (silver in colour) Neutrik make some of the best connectors that are available the world over. There are many copies of the Neutrik connectors available on the internet, don't be fooled by the cheaper makes they may break down and cause problems, why risk it? These are genuine Neutrik connectors. It really isn't worth buying cheaper inferior audio leads with poorly made connectors on.

We make this lead

We have been in the audio industry for well over 25 years. We make this lead up using Neutrik and Van Damme cable in our workshop made professionally for you with our years of experience you are in safe hands.

Write a review

Please login or register to review

Van Damme Neutrik Female XLR To Balanced TRS 1/4" Jack Lead Tour Grade

  • Brand: Neutrik
  • Product Code: FXLRTRSNS
  • £10.59


Available Options


Tags: Van Damme Tour Grade Neutrik Female XLR To Balanced TRS 1/4" Jack Lead Cable