Klotz 2.5mm² 2 Core Neutrik Speakon to Female XLR Speaker Lead

High-Quality Robust Connectors High-Quality German Hard Wearing Cable

Genuine Components Professionally Handmade to Order

Choose Your Length From The Drop Down Menu 0.5m to 30m

2.5mm² 2 Core Cable for better power transfer between amplifier and speaker

High-quality Neutrik Speakon to Female XLR Speakon Lead. Made with genuine 2-pole Neutrik Speakon NL2FX, Neutrik Female XLR NC3FXX, and Klotz Twinaxial professional 2 core 2.5mm² (14AWG) speaker cable, for higher power heavy duty application, less power waste across the cable over thinner cable.

Klotz cable is made in Germany. Klotz cables have been delivering quality cables for decades and are trusted and tried. We carefully selected this speaker cable as it gives great robustness, and flexibility and has a quality feel that you only get from high-end cables. The cable has a twisted pair of conductors within the outer jacket which really helps when coiling the cable up time and time again after gigs and touring and helps to stop kinking.

Connections are made on +1 -1 on NL2FXX-W-S the Speakon on this lead.

This lead is designed to go between a power amplifier output and a passive speaker. Connections are made on +1 -1 connections within the 2 pole NL2FXX-W-S Neutrik Speakon connector.

Connections on the Female XLR pin 2 connects to the +1 pole on the Speakon, pin 1 connects to the -1 on the Speakon. This a standard configuration that suit most applications where a passive loudspeaker is used. The cable is soldered to the solder contacts inside the XLR, we then heat shrink over these connections. Many other cable makers do not do this!

All the components on this lead are genuine. Neutrik has improved and patented the design of the Speakon and has gone a long way to stop counterfeit Speakons from being produced. Do not be fooled into buying inferior copied versions that exist, they will break and let you down when you need them the most. Have confidence in the fact you are buying a connector that is 100% genuine and has all the Neutrik logos on the connector.

Typical applications for this lead are:

PA systems between a power amplifier and passive speaker

Powered mixer to passive speaker

From an active speaker's Speakon output to a passive extension speaker

Bass or Lead guitar amplifier head to speaker cab

Linking speaker cabs together

Note a passive speaker is a speaker cabinet without a built-in amplifier and is driven solely by a power amplifier output.

CABLE LENGTH - Know what you are getting and paying for.

This visible length from the rear of the connector. After searching the internet we have noted that many sellers of leads do not specify length precisely, this may not make a lot of difference when the lead is quite long but when the lead is very short it really does make a difference. The connectors use up approximately 100mm of cable inside of them. Some sellers do not specify the thickness of the cable either!

Neutrik makes high-quality connectors and has been doing this for decades. Where quality and reliability are needed they are trusted time and time again by the biggest names in the professional audio industry.

Neutrik NC3FXX Female XLR

•Unique cage design of female contact for low contact resistance and high integrity

•Female connector with an improved solid metal latch which is larger and easier to handle

•Additional ground spring contacts for better shell ground continuity

•Improved chuck-type strain relief provides higher pull-out force and makes assembly easier and faster

•Boot with polyurethane gland gives high protection to cable bending stresses

•Coloured rings and boots available for coding or identification

•Sleek and ergonomic design - valuable and handy

•Rugged zinc diecast shell, long-lasting and dependable

Made in Germany and has been around for decades. Tried and tested by hire companies, mobile touring bands, DJ's, and professionals around the world. The cable is one of the best cables around and matches other branded cables. Designed specifically for connecting loudspeakers to power amplifiers.

Specifications KLOTZ Cable

2.5mm² (14AWG) made up of 50 x 0.25mm stands of OFC copper per core

Flexible - easy to coil

8mm diameter

Outer jacket soft black PVC - can withstand harsh life touring

Twisted pairs are easier to wind up

Working temperature -20 to +70 degrees Celsius

Test Voltage 50Hz 1min 2000V

Max operating voltage 300V

7 ohms per KM

Made up by us

We bring Neutrik connectors and Klotz cables together in our workshop. We have many years of hands-on experience making audio leads and have been successfully entrusted to do this by many customers over the years.

We sell many different leads please take a look at our website