Klotz 1.5mm² 2 Core Cable Neutrik Speakon to Speakon Speaker Lead

High-Quality Robust Connectors German Hard Wearing Cable

Genuine Components Professionally Handmade to Order

Choose Your Length From The Drop Down Menu 0.5m to 30m

1.5mm² 2 Core Cable between amplifier speaker output and passive speaker

Made with genuine 2-pole Neutrik Speakons and Klotz Twinaxial professional 2 core 1.5mm² speaker cable. Klotz cable is made in Germany. Klotz cables have been delivering quality cables for decades and are trusted and tried. We carefully selected this speaker cable as it gives great robustness, and flexibility and has a quality feel that you only get from high-end cables. The cable has a twisted pair of conductors within the outer jacket which helps when coiling the cable up time and time again after gigs and touring and helps to stop kinking.

Connections are made on +1 -1 on each of the NL2FXX-W-S Speakons on this lead.

This lead is designed to go between any passive speaker cabinet and a power amplifier. Connections are made on +1 -1 connections within the 2 pole NL2FXX-W-S Neutrik Speakon connector.

All the components on this lead are genuine. Neutrik has improved and patented the design of the Speakon and has gone a long way to stop counterfeit Speakons from being produced. Do not be fooled into buying inferior copied versions that exist, they will break and let you down when you need them the most. Have confidence in the fact you are buying a connector that is 100% genuine and has all the Neutrik logos on the connector.

Typical applications for this lead are:

PA systems between a power amplifier and passive speaker

Powered mixer to passive speaker

From an active speaker's Speakon output to a passive extension speaker

Bass or Lead guitar amplifier head to speaker cab

Linking speaker cabs together

Note a passive speaker is a speaker cabinet without a built-in amplifier and is driven solely by a power amplifier.

CABLE LENGTH - Know what you are paying for.

1 m and below will be visible length cable, this is what you would physically see between the connectors. Above 1m will be cut length cable, and 100mm will be inside the connectors.

Specifications Klotz Cable

    1.5mm² (18AWG) made up of 30 x 0.25mm stands of OFC copper per core*

    Flexible - easy to coil

    7mm diameter

    Outer jacket soft black PVC - can withstand harsh life touring

    Twisted pairs are easier to wind up

    Working temperature -20 to +70 degrees Celsius

    Test Voltage 50Hz 1min 2000V

    Max operating voltage 300V

    12.5 ohms per KM

Made up by us