Klotz Speakon to 1/4" Jack Plug 1.5mm² 2 Core Cable Neutrik Speaker Lead

High-quality Speakon to 1/4" Jack lead. Made up with Genuine Neutrik NL2FXX-WS 2 pole Speakon connector, NYS225 1/4" Jumbo Jack plug, and Klotz pure copper Twinaxial professional 2 core 1.5mm² speaker cable. Klotz cable is made in Germany and has been delivering quality cables for decades, trusted and tried. We carefully selected this speaker cable as it gives great robustness, and flexibility and has a quality feel that you only get from high-end cables.

Choose Your Length From The Drop Down Menu 0.5m to 30m

1.5mm² 2 Core Cable between amplifier speaker output and passive speaker

The cable has a twisted pair of conductors within the outer jacket which helps when coiling the cable up time and time again after gigs and touring and helps to stop kinking.

This lead is designed to go between any passive speaker cabinet and a power amplifier. Connections on the Jack plug tip connect to the +1 pole on the Speakon. The sleeve connects to the -1 on the Speakon. This is a standard configuration that suits most applications where a passive loudspeaker is used. The cable is soldered to the solder contacts inside the Jack plug, we then heat shrink over the cable crimp grip part and the soldered connections of the connector. Many other cable makers do not do this.

All the components on this lead are genuine. Neutrik has improved and patented the design of the Speakon and has gone a long way to stop counterfeit Speakons from being produced. Do not be fooled into buying inferior copied versions that exist, they will break and let you down when you need them the most. Have confidence in the fact you are buying a connector that is 100% genuine and has all the Neutrik logos on the connector.

Typical applications for this lead are:

PA systems between power amplifier and passive speaker Powered mixer to passive speaker From an active speaker's Speakon output to passive extension speaker Bass or Lead guitar amplifier head to speaker cab Linking speaker cabs together

Note a passive speaker is a speaker cabinet without a built-in amplifier and is driven solely by a power amplifier.

CABLE LENGTH - Know what you are getting and paying for.

This visible length from the rear of the connector. After searching the internet we have noted that many sellers of leads do not specify length precisely, this may not make a lot of difference when the lead is quite long but when the lead is very short it does make a difference. The connectors use up approximately 80mm of cable inside of them. Some sellers do not specify the thickness of the cable either!

Neutrik makes high-quality connectors and has been doing this for decades. Where quality and reliability are needed they are trusted time and time again by the biggest names in the professional audio industry.

.

Specifications Klotz Cable

1.5mm² (18AWG) made up of 30 x 0.25mm stands of OFC copper per core* Flexible - easy to coil 7mm diameter Outer jacket soft black PVC - can withstand harsh life touring Twisted pair easier for winding up Working temperature -20 to +70 degrees celsius Test Voltage 50Hz 1min 2000V Max operating voltage 300V 12.5 ohms per KM

Made up by us

We bring Neutrik connectors and Klotz cables together in our workshop. We have many years of hands-on experience making audio leads and have been successfully entrusted to do this by many customers over the years.

We sell many different leads please take a look in our website