Klotz Mic Microphone Neutrik Male to Female XLR Lead Cable MY206

KLOTZ Pro Tour Grade Heavy Duty Lead Quality At Its Best

Choose your length from 0.1 m to 30 m from the menu

Custom made to your length - The cable is cut with consideration of the connectors. Measurement is from the rear of the connectors where cable exits the connector.

Klotz professional balanced microphone lead with Neutrik 3 pin Male and Female XLR's. The cable has a special extremely flexible rubber-like PVC jacket, spiral shield OFC and stranded copper inner cores. The cable has ultra-low capacitance (60 pF/m) for better clearer sound reproduction. Developed for high demands of everyday use on stage, touring, outdoor events and in the studio.

This lead is made up by us Ultimate Pro Audio Ltd in our workshops by professional technicians with many years of experience. We only use high quality components when making any lead this ensures you will always get a professional reliable lead that will not let you down when you are under pressure to perform at your best. Klotz and Neutrik are both made in Germany. We have looked at many cables on the market from all over the world and there very few that are as high quality as this cable. The connectors are one of highest quality that are available, made to the high specifications, CNC machined reliable and robust. We only use genuine Neutrik connectors NOT copies.

To interconnect audio equipment with XLR's (3 pin) such as:

Handheld microphone to mixing desk

Mixing desk to amplifier inputs

Patching audio equipment in a rack etc

Connecting mixer output line level to active powered speakers

Signal input link between amplifiers

This lead is for mic/line level signal and should never be used on the low impedance speaker output of an amplifier to connect a passive speaker. If you need help with this type of lead let us know.

Ultra-low capacitance (60 pF/m)

Extremely flexible cable

Reliable and robust

ETP

Conductor: stranded bare copper, 28 x 0.10 mm

Cross Section: 0.22 mm2

Insulation: PE

Core Arrangement: 2 cores + cotton tracers, twisted

Shielding: bare copper spiral shield

Outer Jacket: PVC, matt

Overall Diameter: 6.15mm

Min Radius: 30mm

Working Temperature: -20C / +70C

Conductor Resistance: 85 ohm/km

Capacitance:

Cond/Cond. 60 pF/m

Cond/Shield 110 pF/m

Insulation Resistance: > 100 Mohm x km